The servo feed system is the core part of the machining center, responsible for executing displacement and speed commands issued by the CNC device to control the precise movement of each axis of the machine tool. It usually consists of servo motors, drivers, feedback devices (such as encoders), and mechanical transmission mechanisms. The servo motor receives control signals from the driver and achieves linear or rotational motion of the machine tool through a mechanical transmission mechanism. The feedback device provides real-time position information to ensure the accuracy and response speed of the motion. The requirements for the servo feed system of the machining center are as follows:
1. Wide speed regulation range
The speed range refers to the interval between the lowest and highest speeds that an electric motor can provide. In machining centers, due to the different cutting tools, processing materials, and part processing requirements, in order to ensure optimal cutting conditions in various situations, the servo system is required to have a sufficiently wide speed range.
2. High displacement accuracy
The accuracy of a servo system refers to the degree to which the output follows the input accurately. Displacement accuracy refers to the degree of conformity between the displacement required by the command pulse for the feed of the machine tool worktable and the actual displacement of the worktable converted by the servo system from the command pulse. The smaller the error between the two, the higher the displacement accuracy.
3. Sufficient transmission rigidity and high speed stability
Having sufficient transmission rigidity to ensure that the system is not easily affected by external interference. Having high speed stability ensures that the system can reach a new or return to its original equilibrium state after a brief adjustment process in the event of external interference. The servo system has strong anti-interference ability, which can ensure uniform and smooth feed speed; Stability directly affects the precision and surface roughness of CNC machining.
4. Quick response, no overshoot
In order to ensure productivity and processing quality, in addition to high positioning accuracy, servo drives also require good fast response characteristics, that is, fast response to tracking command signals. This is because CNC systems require sufficient acceleration during start-up and braking to shorten the transition time of the feed system and reduce contour transition errors.
5. Low speed high torque, strong overload capacity
Generally speaking, servo drives have an overload capacity of 1.5 times or more within minutes or even half an hour, and can overload 4-6 times in a short period of time without damage.
6. High reliability
The feed drive system of the machining center is required to have high reliability, good working stability, strong environmental adaptability to temperature, humidity, vibration, and strong anti-interference ability.
Oct 15, 2024
Leave a message
Requirements For Servo Feed System Of Machining Center
Send Inquiry





