Contour control
CNC lathe control system belongs to contour control. CNC lathes execute part or all of the numerical control functions through the control program stored in the computer memory to control the movement of mechanical equipment, including mechanical quantities and switch quantities such as position, angle, and speed.
The control system of CNC lathes can be divided into the following three control modes:
1. Open-loop control: This type of CNC system does not have a detection device or a feedback circuit, and uses a stepper motor as a driving element.
2. Semi-closed-loop control: The rotation amount of the motor or the lead screw is fed back, and the position detection element is installed at the end of the motor shaft or the end of the lead screw shaft. The actual operating position of the machine tool table is indirectly calculated by measuring the angular displacement.
6. Closed-loop control: The position signal of the workbench is fed back through the grating ruler, and the position detection device is installed on the machine tool workbench to detect the actual operating position of the machine tool workbench.
These control modes have their own advantages and disadvantages. The open-loop control structure is simple but the accuracy is low, the semi-closed-loop control has high accuracy but there are errors, and the closed-loop control has the highest accuracy but the system is complex and unstable.
Oct 04, 2024
Leave a message
What Kind Of Control Does The CNC Lathe Control System Belong To?
Send Inquiry





